Your Wavlink Extender Login Made Simple

Are you tired of trying different methods to log in to your Wavlink Extender but aren't able to configure it? If yes, then do not worry as today we will guide you through the same. So without further ado let’s just get started. 

Wavlink Extender Login Guide

1. Preparing For Login

✓ Connect To The Extender 

The first thing is to connect your chosen device to the extender’s WiFi network. You can choose any device like your computer, smartphone, laptop, iPad or any device with Wi-Fi capabilities. Now, go to the Wi-Fi settings of your device and in the list of available networks look out for the network name “Wavlink Extender” or something similar to it. Upon finding it click on “Connect”.

Quick Tip: In case you do not see any network name then consider refreshing the page. Alternatively, you can also use an Ethernet cable to establish a direct connection between your device and the extender.

✓ Ensure Proper Power Supply 

Verify that your Wavlink Extender is properly connected to a secure power outlet that has an uncut supply of electricity throughout the login process. It is advisable to choose a power circuit that has a connection with your inverter, so in case electricity cuts off, your extender still gets the supply of electricity.

2. Accessing The Login Page

✓ Find The Default IP Address 

For the Wavlink Extender Login process, you would require the default IP address that will take you to the login page. Most Wavlink extenders use a default IP address like “192.168.10.1” or  “192.168.0.1”. Refer to the user manual or the label on the extender for the exact IP address because sometimes some models might have different IP addresses.

✓ Open A Web Browser 

On the same device that you used to connect to the Extender Wi-Fi network, open a web browser like Google Chrome, Mozilla Firefox or Safari.

✓ Enter The Default IP Address 

In the address bar of your web browser fill in the default IP address and click on “Enter”. As soon as you press the enter key, this action will direct you to the Wavlink's Extender Login page.

✓ Alternative Access Method 

In case the default IP address doesn't work first try adding http:// in front of the IP address. If still it doesn't work then try accessing it via the default web address which is usually “http://wifi.wavlink.com”. 

3. Enter Login Details 

✓ Default Username And Password 

Once you enter the Wavlink Extender login page, you will be asked to fill in the default username which is “admin” and the default password which is either “admin” or “password”. Press “Enter”. Refer to the user manual if these defaults do not work.

✓ Change The Password 

Once you successfully login into Wavlink Extender it's advised for security reasons to first change the default username and password. Use strong, unique passwords to enhance security and prevent unauthorized access.

✓ Password Recovery Options

In case you have already logged in using a different password but now do not remember the exact details, do not worry just perform the factory reset on the Extender as it will revive the extender to its original settings and now you can follow the login process all over again. Here's how you can perform factory reset:

Locate the reset button on the Extender. With the help of a paperclip press it down and hold for a minimum of 10 seconds and release the button when it starts showcasing a red light. Now, the extender will restart and reset to its factory settings. 

4. Navigating The Admin Interface 

Once logged in, you will be taken to the admin interface, where you can configure various settings such as network configuration, wireless settings, and security options. Make adjustments based on your network requirements. Once done, make sure you save and apply changes. Look for a “Save” or “Apply” button to confirm your modifications and update the extender’s configuration.

So by following all these above-mentioned steps, you’ll be able to log in to your Wavlink extender and effectively manage its settings to optimize your network’s performance.

Some Bonus Tips And Tricks 

✓ If the login page doesn't load, then make sure you clear all the caches and cookies of the web browser.

✓ Always make sure all the devices that you are using for the Wavlink Login process are well-updated to their latest versions.

✓ If you're using a VPN, disable it, as it might interfere with the connection to the extender.

✓ Check the LEDs on the extender for any error indicators. Refer to the user manual to know exactly what the LED colors or blinking patterns signify.

✓ The manual usually provides the most accurate and detailed information about accessing the setup page, so it's advisable to always make use of it.

In case of any other queries or issues, feel free to contact Wavlink's customer support team. You can reach out to them anytime via phone call, mail, live chat or through various social media platforms.